SenS SWIR 640A-STE (Video Output)
- PAL or NTSC up to 60 fps
- AET (automatic exposure time)
- TE Cooled VGA SWIR sensor
The SenS camera platform is unique in performance vs. standard SWIR InGaAs cameras. This SenS sensor supports dual light response modes: linear response for low light sensitivity (two software selectable gains) and wide dynamic range (WDR) when light levels are higher. No other SWIR camera provides such superb image quality over a wide range of light conditions.
This version of SenS supports Video output TE cooling, and AET (automatic exposure time).
+TE Cooled VGA sensor
+Video Output (PAL or NTSC)
+VGA InGaAs sensor (640X512, 15 um)
+900-1700 nm spectral response
+Snapshot shutter
+60 fps
+AET (automatic exposure time)
+Dual sensor response (linear and wide dynamic range)
NON-ITAR SWIR Camera
Resolution | 640(H)x512(V) |
Interface | Video output (PAL or NTSC) |
Sensor format | 1 inch |
Pixel pitch | 15µm |
Mode | Global shutter Dual mode: Log or CTIA Reading: ITR or IWR Option: CDS (only in CTIA) AET (automatic exposure time) |
Partial reading mode | Possible to integer just a part of the sensor (ROI) and display only this window on the video output. This option allows a frame rate increase on the ROI |
Cooling capacity | ΔT = 30°C |
TEC
|
3 modes
|
Exposure time range |
10 usec. to 33 msec
|
Spectral response | 0.9 to 1.7um |
Dynamic range
|
120dB typical in Log
63dB typical in CTIA (Low Gain) 49dB typical in CTIA (High Gain) |
Full well capacity (in CTIA)
|
>17ke- (High Gain)
>380ke- (Low Gain) |
ADC | 14 bits |
Sensor Noise
|
45 e- (with CDS)
|
Frame rate | Up to 60 fps full frame |
Trigger | IN/OUT (LVTTL), Selectable delay |
Consumption
|
Camera consumption (standard mode) < 2.5W
TEC comsumption < 4W |
Power Range | 5V (USB) |
Dimension | 46x46x57mm |
Mount | C-Mount native |
Weight | < 215g |
Temperature Range | 0°C to +65°C |